TECHNICAL SPECIFICATION FOR - BINARY SERVO
CONTROLLED VOLTAGE STABILIZER |
| Particulars |
Single Phase |
Three Phase |
| Capacities |
0.5 KVA to 50 KVA |
3 KVA to 160 KVA |
| Input Voltage Range |
|
|
| Normal |
195 V to 265 V |
340 V to 460 V |
| Wide |
170 V to 270 V |
300 V to 465 V |
| Extended |
140 V to 270 V |
240 V to 465 V |
| Output Voltage |
220 V / 230 V / 240 V |
380 V / 400 V / 415 V |
| Regulation |
+ / - 1% |
+ / - 1% |
| Efficiency |
>96% |
>96% |
| Input Frequency |
50 Hz + / - 3Hz |
50 Hz + / - 3Hz |
| Wave From |
Same as Input |
Same as Input |
| Effect of Power factor |
Nil |
Nil |
| Motor drive |
Heavy duty AC |
Heavy duty AC |
| |
Synchronous Motor |
Synchronous Motor |
| Indication |
Mains On |
Mains On |
| |
Output On |
Output On |
| |
Low Cut-off |
Low Cut-off |
| |
High Cut-off |
High Cut-off |
| Metering |
Analog Voltmeter to read |
Analog Voltmeter to read |
| |
Input & Output Voltage |
Input Voltage with Selector |
| |
with Selector Switch |
Switch, Analog Voltmeter to read Output Voltage with Selector Switch, Analog Current meter for above 50 KVA. |
| Rate of Correction |
35V/Sec or up to 105V/Sec |
35V/Sec or up to 105V/Sec |
| Operating Temperature |
0 - 45° C |
0 - 45° C |
| Duty cycle |
Continuous |
Continuous |
| Nature of Cooling |
Air Cooled / Oil Cooled |
Air Cooled / Oil Cooled |
| Protection(Optional) |
Over Voltage |
Over Voltage |
| |
Under Voltage |
Under Voltage |
| |
Over Load. Short Circuit |
Over Load. Short Circuit |
| Stabilizer Standard |
As per IS 9815 |
As per IS 9815 |
| Oil Standard |
As per IS 335 |
As per IS 335 |
|
- Stabilizer as per customerís requirement. Stabilizer with 3 Phase to 1 Phase or
two Phase, Outdoor type also available.
- Due to Continuous R & D, Specifications are subject to change.
|
| |
|
|
| |
|
